Material Drying
6 مشاهدة
Silver streaks caused by moisture during EAA processing
ظاهرة المشكلة
White silver streaks appear on the surface of EAA injection molded products
تحليل الأسباب
Raw material contains moisture >0.05%, which vaporizes during high-temperature processing to form bubbles that are stretched into silver streaks; insufficient drying or condensed moisture in the hopper
الحل
1) Dry the raw material at 80°C for 3-4h to moisture content <0.02%; 2) Increase the back pressure by 0.5-1MPa for venting; 3) Reduce the injection speed to avoid air entrainment; 4) Heat the hopper to prevent condensed moisture
الخلاصة الأساسية
Silver streaks are caused by moisture vaporization and stretching; drying and venting are the main countermeasures
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!