Molds & Tooling
6 مشاهدة
EEA extruded film thick at edges and thin in the middle
ظاهرة المشكلة
EEA extruded film edges 20-30% thicker than the middle, thickness distributed in a U shape
تحليل الأسباب
Improper die runner design, low resistance and large flow at the edges; EEA melt elasticity, larger swell at the edges; air ring cooling has different edge effects
الحل
1) Adopt coat-hanger die design to balance resistance between the middle and edges; 2) Fine-adjust die gap, slightly larger in the middle and slightly smaller at the edges for compensation; 3) Slightly reduce air ring air volume at the edges; 4) Add restrictor bars to adjust edge flow
الخلاصة الأساسية
U-shaped thickness is caused by die runner and swell difference; coat-hanger die and gap fine adjustment are the key
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!