Molds & Tooling
6 مشاهدة
EVA length out of tolerance
ظاهرة المشكلة
EVA product length deviation >±0.5mm exceeds tolerance
تحليل الأسباب
EVA shrinkage rate unstable, fluctuating ±0.5%; mold dimension design did not consider shrinkage compensation; insufficient cooling with dimensions not stabilized
الحل
1) Accurately measure EVA shrinkage rate and compensate the mold; 2) Sufficient cooling to ensure dimensional stability; 3) Annealing treatment to eliminate post-shrinkage
الخلاصة الأساسية
Length out of tolerance is caused by unstable shrinkage rate; precise shrinkage compensation is key
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!