Processing Machinery
6 مشاهدة
Poor PVA plasticization
ظاهرة المشكلة
PVA product shows unmelted particles, incomplete plasticization
تحليل الأسباب
Screw compression ratio insufficient <2.5, low plasticizing pressure; screw speed on the low side, insufficient shear; processing temperature on the low side
الحل
1) Select a screw with compression ratio >3; 2) Increase screw speed to increase shear; 3) Raise processing temperature by 5-10°C
الخلاصة الأساسية
Poor plasticization is caused by improper screw design; optimizing the screw and raising temperature are the key
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!