Processing Machinery
8 visualizaciones
Poor PVA plasticization
Fenómeno del problema
PVA product shows unmelted particles, incomplete plasticization
Análisis de la causa
Screw compression ratio insufficient <2.5, low plasticizing pressure; screw speed on the low side, insufficient shear; processing temperature on the low side
Solución
1) Select a screw with compression ratio >3; 2) Increase screw speed to increase shear; 3) Raise processing temperature by 5-10°C
Conclusión clave
Poor plasticization is caused by improper screw design; optimizing the screw and raising temperature are the key
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!