Injection Molding
7 مشاهدة
Abnormal pressure curve reflects process or equipment problems
ظاهرة المشكلة
Abnormal pressure curve reflects process or equipment problems
تحليل الأسباب
Pressure curve peak too high, clamping force insufficient, flash
Pressure curve low, injection pressure insufficient, short shots
Large pressure curve fluctuation, hydraulic system unstable
Holding pressure section pressure decays too fast, gate freezes prematurely
Pressure sensor failure, inaccurate data
الحل
If the pressure peak is too high, reduce injection speed or increase clamping force
If the pressure is low, increase injection pressure
Stabilize the hydraulic system
Extend gate freezing time to prevent holding pressure decay
Calibrate the pressure sensor
الخلاصة الأساسية
Pressure monitoring requires stable hydraulics and calibrated sensors
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!