Injection Molding
7 مشاهدة
Severe Internal Stress Concentration of CMC
ظاهرة المشكلة
Internal stress of CMC products >15MPa causes cracking during storage
تحليل الأسباب
Injection speed is too fast and orientation stress is large; uneven cooling freezes thermal stress; improper gate position concentrates flow orientation
الحل
1)Reduce injection speed to reduce orientation; 2)Uniform mold temperature to reduce thermal stress; 3)Anneal at 80°C/4h to release stress; 4)Optimize gate position
الخلاصة الأساسية
Internal stress is caused by fast injection and uneven cooling; speed reduction, uniform cooling and annealing are the key
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!