Extrusion & Post
12 مشاهدة
DSTDP extruded film winding wrinkling
ظاهرة المشكلة
DSTDP extruded film shows transverse wrinkles and longitudinal creases after winding
تحليل الأسباب
Film tension uneven, fluctuating ±20%; film thickness uneven causing inconsistent stretching of each section; after cooling, shrinkage differs in each direction
الحل
1) Automatic tension control system to stabilize winding tension; 2) improve film thickness uniformity to ±5%; 3) adjust guide roller parallelism <0.05mm/m; 4) fully cool film to <30°C before winding
الخلاصة الأساسية
Film wrinkling is caused by tension fluctuation and uneven thickness; automatic tension control and uniformization are key
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!