Extrusion & Post
9 Aufrufe
DSTDP extruded film winding wrinkling
Problembeschreibung
DSTDP extruded film shows transverse wrinkles and longitudinal creases after winding
Ursachenanalyse
Film tension uneven, fluctuating ±20%; film thickness uneven causing inconsistent stretching of each section; after cooling, shrinkage differs in each direction
Lösung
1) Automatic tension control system to stabilize winding tension; 2) improve film thickness uniformity to ±5%; 3) adjust guide roller parallelism <0.05mm/m; 4) fully cool film to <30°C before winding
Wichtigste Erkenntnis
Film wrinkling is caused by tension fluctuation and uneven thickness; automatic tension control and uniformization are key
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!