Molds & Tooling
6 مشاهدة
POE length out of tolerance
ظاهرة المشكلة
POE product length deviation >±0.5mm, exceeding tolerance
تحليل الأسباب
POE shrinkage unstable, fluctuating ±0.5%; mold dimension design did not consider shrinkage compensation; cooling insufficient, dimensions not stabilized
الحل
1) Precisely measure POE shrinkage and compensate the mold; 2) Full cooling to ensure dimensional stability; 3) Annealing treatment to eliminate post-shrinkage
الخلاصة الأساسية
Length out of tolerance is caused by unstable shrinkage; precise shrinkage compensation is key
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!