Injection Molding
13 مشاهدة
Back Pressure Setting Problem in PBT '2079851475616104452
ظاهرة المشكلة
Too low back pressure causes poor plasticization of the material with unmelted particles, and too high back pressure generates shear heat degradation.
تحليل الأسباب
The back pressure is set improperly, and the back pressure is not set in coordination with the barrel temperature and screw speed.
الحل
Set the back pressure at 0.3-1.0MPa; optimize according to the plasticization quality and melt temperature.
الخلاصة الأساسية
PBT back pressure needs to balance plasticization and degradation risk.
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!