Injection Molding
15 visualizaciones
Back Pressure Setting Problem in PBT '2079851475616104452
Fenómeno del problema
Too low back pressure causes poor plasticization of the material with unmelted particles, and too high back pressure generates shear heat degradation.
Análisis de la causa
The back pressure is set improperly, and the back pressure is not set in coordination with the barrel temperature and screw speed.
Solución
Set the back pressure at 0.3-1.0MPa; optimize according to the plasticization quality and melt temperature.
Conclusión clave
PBT back pressure needs to balance plasticization and degradation risk.
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!