Injection Molding
13 مشاهدة
Insufficient filling/short shot in PET preform injection
ظاهرة المشكلة
The cavity is not completely filled during PET preform injection; the preform top is missing or the length is insufficient.
تحليل الأسباب
Injection pressure or speed is insufficient; melt temperature is on the low side and fluidity is poor; gate size is on the small side with large resistance; venting is poor.
الحل
Increase injection pressure to 80-120MPa and increase injection speed; increase barrel temperature; enlarge gate size; improve venting.
الخلاصة الأساسية
PET preform short shot is usually related to excessive flow resistance.
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!