Injection Molding
8 مشاهدة
Ejector whitening in demolding of PET injection molded parts
ظاهرة المشكلة
White spots or cracks appear at ejection positions of PET products, especially obvious in transparent products.
تحليل الأسباب
Ejection force is too large or the ejector pin area is too small, causing excessive local stress; draft angle is insufficient; mold temperature is on the high side and rigidity is insufficient.
الحل
Increase ejector pin area or number to disperse ejection force; increase draft angle to ≥2°; extend cooling time.
الخلاصة الأساسية
PET ejector whitening is the result of local stress exceeding material strength.
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!