Molds & Tooling
6 مشاهدة
PETG screw cleaning incomplete, cross-contamination
ظاهرة المشكلة
Cross-contamination occurs when switching from other materials to PETG, with variegated spots or foreign matter in the products.
تحليل الأسباب
The previous material has residue in the screw, barrel and nozzle, the purging compound amount or time is insufficient, and the temperature switchover is not in place.
الحل
Use a dedicated purging compound to fully clean, not less than 3 times the barrel capacity; raise and lower temperature in stages; disassemble the nozzle to clean dead corners.
الخلاصة الأساسية
PETG product changeover requires strict cleaning procedures, especially for transparent products.
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!