Injection Molding
4 مشاهدة
Leakage of the screw head non-return ring during PETG injection
ظاهرة المشكلة
During the holding stage, the non-return ring leaks so that the holding pressure cannot be transmitted to the cavity.
تحليل الأسباب
The non-return ring is worn or stuck and not closed tightly, and the sealing surface of the screw head is damaged.
الحل
Check and replace the non-return ring; repair or replace the screw head; regularly check the state of the non-return ring.
الخلاصة الأساسية
PETG non-return ring leakage directly affects the holding effect.
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!