Injection Molding 5 visualizações

Leakage of the screw head non-return ring during PETG injection

Fenómeno do problema

During the holding stage, the non-return ring leaks so that the holding pressure cannot be transmitted to the cavity.

Análise das causas

The non-return ring is worn or stuck and not closed tightly, and the sealing surface of the screw head is damaged.

Solução

Check and replace the non-return ring; repair or replace the screw head; regularly check the state of the non-return ring.

Conclusão principal

PETG non-return ring leakage directly affects the holding effect.

PETG non-return ring leakage holding pressure

Isto foi útil?

0 pessoas acharam isto útil