Molding Process
6 مشاهدة
Shrinkage rate fluctuation of PLA products
ظاهرة المشكلة
The shrinkage rate of products fluctuates between 0.2-1.0%, and the dimensions are unstable.
تحليل الأسباب
The crystallization rate of PLA is slow (semi-crystalline type), different cooling conditions cause crystallinity differences, and the shrinkage rate changes accordingly; the holding pressure is insufficient.
الحل
Raise the mold temperature to 80-100°C to promote uniform crystallization; extend the holding time; stabilize the mold temperature.
الخلاصة الأساسية
PLA shrinkage rate fluctuation is closely related to crystallization behavior.
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!