Molding Process
8 visualizações
Shrinkage rate fluctuation of PLA products
Fenómeno do problema
The shrinkage rate of products fluctuates between 0.2-1.0%, and the dimensions are unstable.
Análise das causas
The crystallization rate of PLA is slow (semi-crystalline type), different cooling conditions cause crystallinity differences, and the shrinkage rate changes accordingly; the holding pressure is insufficient.
Solução
Raise the mold temperature to 80-100°C to promote uniform crystallization; extend the holding time; stabilize the mold temperature.
Conclusão principal
PLA shrinkage rate fluctuation is closely related to crystallization behavior.
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!