Extrusion & Post
6 مشاهدة
Stringing and nozzle clogging in PLA 3D printing
ظاهرة المشكلة
When printing PLA by FDM, the nozzle strings or clogs.
تحليل الأسباب
The printing temperature is too high, the melt is too thin and strings, and the retraction is insufficient; or the temperature is too low, the melt is not completely extruded and clogs the nozzle.
الحل
Optimize the printing temperature at 190-210°C; increase the retraction distance to 4-6mm; clean or replace the nozzle.
الخلاصة الأساسية
The parameter optimization of PLA 3D printing is the key to printing success.
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!