Injection Molding
6 مشاهدة
Weld lines appear on PLA injection molded products
ظاهرة المشكلة
The strength of the product at the weld line is low.
تحليل الأسباب
The temperature of the PLA melt is low when it converges and the fusion is poor, and the two melt fronts cannot be well combined.
الحل
Raise the melt temperature to 190-200°C; raise the mold temperature; optimize the gate position to reduce weld lines.
الخلاصة الأساسية
PLA weld lines are related to the melt temperature and convergence conditions.
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!