Extrusion & Post
2 Aufrufe
LDPE Extrusion Coating Pinholes
Problembeschreibung
Needle-like small holes appear in the coating, and barrier property fails.
Ursachenanalyse
Molten film rupture, base film surface contamination or too thin coating; bubble rupture in the melt also leaves pinholes.
Lösung
①Increase coating thickness; ②clean the substrate surface; ③stabilize melt temperature to prevent rupture; ④check raw material moisture and volatiles.
Wichtigste Erkenntnis
Pinhole = check three: film rupture + substrate contamination + thin layer.
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!