Extrusion & Post
3 visualizaciones
LDPE Extrusion Coating Pinholes
Fenómeno del problema
Needle-like small holes appear in the coating, and barrier property fails.
Análisis de la causa
Molten film rupture, base film surface contamination or too thin coating; bubble rupture in the melt also leaves pinholes.
Solución
①Increase coating thickness; ②clean the substrate surface; ③stabilize melt temperature to prevent rupture; ④check raw material moisture and volatiles.
Conclusión clave
Pinhole = check three: film rupture + substrate contamination + thin layer.
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!