Molds & Tooling
2 Aufrufe
PA66 mold sticking
Problembeschreibung
Grips the core, demolding difficult.
Ursachenanalyse
High holding pressure, small draft, shrinkage gripping; crystallization shrinkage gives it strong gripping force on the core; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based solely on experience.
Lösung
①Appropriately reduce holding pressure to reduce gripping force and frozen internal stress; ②increase draft angle to reduce demolding resistance; ③polish the cavity or die lip to reduce surface resistance and improve replication; ④extend cooling time so products are fully set before demolding; ⑤optimize the ejection system to ensure balanced ejection and distributed force.
Wichtigste Erkenntnis
PA66 mold sticking='gripping force': reduce pressure and temperature to reduce gripping, draft and polishing to reduce resistance; crystalline nylon demolding resistance must be managed as a priority; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence.
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!