Molds & Tooling
6 visualizações
PA66 mold sticking
Fenómeno do problema
Grips the core, demolding difficult.
Análise das causas
High holding pressure, small draft, shrinkage gripping; crystallization shrinkage gives it strong gripping force on the core; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based solely on experience.
Solução
①Appropriately reduce holding pressure to reduce gripping force and frozen internal stress; ②increase draft angle to reduce demolding resistance; ③polish the cavity or die lip to reduce surface resistance and improve replication; ④extend cooling time so products are fully set before demolding; ⑤optimize the ejection system to ensure balanced ejection and distributed force.
Conclusão principal
PA66 mold sticking='gripping force': reduce pressure and temperature to reduce gripping, draft and polishing to reduce resistance; crystalline nylon demolding resistance must be managed as a priority; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence.
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!