Injection Molding
5 Aufrufe
PC Product Surface Flow Marks
Problembeschreibung
Visible wavy flow marks on the PC product surface, obvious on high-gloss surfaces.
Ursachenanalyse
Front temperature drops too fast or injection speed fluctuates; low mold temperature and a small gate cause unstable filling.
Lösung
①Increase mold temperature and melt temperature; ②Optimize the speed curve to keep the front stable; ③Enlarge the gate; ④Check hot runner temperature uniformity.
Wichtigste Erkenntnis
Flow mark treatment = constant front temperature and speed.
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!