Injection Molding
8 مشاهدة
PC Product Surface Flow Marks
ظاهرة المشكلة
Visible wavy flow marks on the PC product surface, obvious on high-gloss surfaces.
تحليل الأسباب
Front temperature drops too fast or injection speed fluctuates; low mold temperature and a small gate cause unstable filling.
الحل
①Increase mold temperature and melt temperature; ②Optimize the speed curve to keep the front stable; ③Enlarge the gate; ④Check hot runner temperature uniformity.
الخلاصة الأساسية
Flow mark treatment = constant front temperature and speed.
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!