Molds & Tooling
3 Aufrufe
POM Weld Line Strength
Problembeschreibung
Insufficient strength at the weld line; gears and snaps fracture and fail along the weld line
Ursachenanalyse
When POM melt fronts meet, molecular chain entanglement is insufficient, making the weld line a weak strength band; improper gate position causes the weld line to fall in the stressed area, cracking first under fatigue load
Lösung
①Increase mold temperature to improve front fusion quality; ②position the gate so the weld line avoids stressed areas; ③if necessary, set an overflow well to discharge the cold material front; after adjustment, take continuous samples to verify the effect, and resume mass production only after confirming stability
Wichtigste Erkenntnis
POM weld line management relies on moving design forward; high mold temperature and gate layout optimization transfer the weak line to non-critical areas; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!