Molds & Tooling
6 مشاهدة
POM Weld Line Strength
ظاهرة المشكلة
Insufficient strength at the weld line; gears and snaps fracture and fail along the weld line
تحليل الأسباب
When POM melt fronts meet, molecular chain entanglement is insufficient, making the weld line a weak strength band; improper gate position causes the weld line to fall in the stressed area, cracking first under fatigue load
الحل
①Increase mold temperature to improve front fusion quality; ②position the gate so the weld line avoids stressed areas; ③if necessary, set an overflow well to discharge the cold material front; after adjustment, take continuous samples to verify the effect, and resume mass production only after confirming stability
الخلاصة الأساسية
POM weld line management relies on moving design forward; high mold temperature and gate layout optimization transfer the weak line to non-critical areas; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!