Molds & Tooling
3 Aufrufe
PP Mold Sticking
Problembeschreibung
Parts stick to the cavity or grip the core tightly, getting scratched during demolding.
Ursachenanalyse
Excessive holding pressure, high melt and mold temperature, insufficient draft angle, roughened cavity; PP's shrink-and-grip-core characteristic aggravates sticking.
Lösung
①Reduce holding pressure and melt temperature; ②increase draft angle; ③polish the cavity along the demolding direction; ④optimize ejection balance.
Wichtigste Erkenntnis
For mold sticking, reduce pressure first, then fix draft and polishing.
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!