Molds & Tooling
7 visualizações
PP Mold Sticking
Fenómeno do problema
Parts stick to the cavity or grip the core tightly, getting scratched during demolding.
Análise das causas
Excessive holding pressure, high melt and mold temperature, insufficient draft angle, roughened cavity; PP's shrink-and-grip-core characteristic aggravates sticking.
Solução
①Reduce holding pressure and melt temperature; ②increase draft angle; ③polish the cavity along the demolding direction; ④optimize ejection balance.
Conclusão principal
For mold sticking, reduce pressure first, then fix draft and polishing.
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!