Molds & Tooling
3 Aufrufe
PP Glass Fiber Reinforced Warpage
Problembeschreibung
GF-PP flat parts warp along a fixed direction; uneven cooling adjustments are ineffective.
Ursachenanalyse
Glass fiber orientation causes flow-direction/transverse shrinkage differences; gate position determines orientation direction.
Lösung
①Adjust gate position; ②Moldflow fiber orientation analysis; ③balance holding pressure; ④select low-warpage mineral/glass fiber hybrid filled grades.
Wichtigste Erkenntnis
Orientation warpage is broken through from gate design.
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!