Injection Molding
5 Aufrufe
PSU Insert Molding
Problembeschreibung
PSU metal insert products show poor interfacial bonding and stress cracking; failure after thermal cycling.
Ursachenanalyse
Thermal expansion difference between PSU and metal; insufficient insert preheating; molding stress concentrates at the interface; thermal cycling stress accumulates.; During on-site troubleshooting, verify item by item according to this mechanism, avoiding blindly adjusting the machine based solely on experience
Lösung
①Fully preheat inserts; ②Mechanical interlock design at the interface; ③Low-stress molding; ④Thermal cycling verification.; After adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability
Wichtigste Erkenntnis
PSU insert parts require management of thermal expansion mismatch; preheating and interlocking are standard means; cyclic verification exposes long-term risks.; After confirming effectiveness, solidify the parameters and practices into the work instructions to prevent recurrence
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!