Injection Molding
3 visualizaciones
PSU Insert Molding
Fenómeno del problema
PSU metal insert products show poor interfacial bonding and stress cracking; failure after thermal cycling.
Análisis de la causa
Thermal expansion difference between PSU and metal; insufficient insert preheating; molding stress concentrates at the interface; thermal cycling stress accumulates.; During on-site troubleshooting, verify item by item according to this mechanism, avoiding blindly adjusting the machine based solely on experience
Solución
①Fully preheat inserts; ②Mechanical interlock design at the interface; ③Low-stress molding; ④Thermal cycling verification.; After adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability
Conclusión clave
PSU insert parts require management of thermal expansion mismatch; preheating and interlocking are standard means; cyclic verification exposes long-term risks.; After confirming effectiveness, solidify the parameters and practices into the work instructions to prevent recurrence
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!