Extrusion & Post
9 Aufrufe
EAA vacuum section overflow
Problembeschreibung
Material overflow at the vacuum section of EAA extrusion, vent hole blocked
Ursachenanalyse
EAA melt viscosity low and overflowing at the vacuum section; vacuum section temperature too high making viscosity even lower and aggravating overflow; improper vent hole design
Lösung
1) Reduce vacuum section temperature by 5-10°C to increase viscosity; 2) Add a baffle above the vent hole to prevent overflow; 3) Increase screw speed to accelerate conveying and reduce residence time
Wichtigste Erkenntnis
Overflow is caused by low melt viscosity; lowering temperature and adding a baffle is key
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!