Molding Process
6 Aufrufe
EVA compression set is large
Problembeschreibung
EVA product compression set >30%, below the 15% requirement
Ursachenanalyse
EVA elastic recovery insufficient; crosslinking degree too low with unrecoverable plastic deformation; density too low with thin cell walls and poor recovery
Lösung
1) Increase crosslinking degree to 60-70% to reduce plastic deformation; 2) Select EVA grades with high elastic recovery; 3) Add reinforcing fillers
Wichtigste Erkenntnis
Large compression set is caused by insufficient crosslinking; increasing crosslinking degree is key
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!