Molding Process
4 visualizaciones
EVA compression set is large
Fenómeno del problema
EVA product compression set >30%, below the 15% requirement
Análisis de la causa
EVA elastic recovery insufficient; crosslinking degree too low with unrecoverable plastic deformation; density too low with thin cell walls and poor recovery
Solución
1) Increase crosslinking degree to 60-70% to reduce plastic deformation; 2) Select EVA grades with high elastic recovery; 3) Add reinforcing fillers
Conclusión clave
Large compression set is caused by insufficient crosslinking; increasing crosslinking degree is key
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!