Molding Process
3 visualizações
EVA compression set is large
Fenómeno do problema
EVA product compression set >30%, below the 15% requirement
Análise das causas
EVA elastic recovery insufficient; crosslinking degree too low with unrecoverable plastic deformation; density too low with thin cell walls and poor recovery
Solução
1) Increase crosslinking degree to 60-70% to reduce plastic deformation; 2) Select EVA grades with high elastic recovery; 3) Add reinforcing fillers
Conclusão principal
Large compression set is caused by insufficient crosslinking; increasing crosslinking degree is key
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!