Extrusion & Post
9 Aufrufe
Slow curing of PU coating
Problembeschreibung
PU coating cures at room temperature >24h, below the 8h requirement
Ursachenanalyse
Curing agent NCO/OH ratio too low <1.0; low ambient humidity <40%RH delays curing
Lösung
1) Increase NCO/OH ratio to 1.1-1.2; 2) Control ambient humidity at 50-70%RH to accelerate curing; 3) Add 0.1wt% drier
Wichtigste Erkenntnis
PU coating curing speed is determined by NCO/OH ratio and humidity
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!