Material Analysis
3 Aufrufe
Bubbles in PU elastomer casting
Problembeschreibung
Internal bubbles of 0.5-2mm in PU elastomer cast products
Ursachenanalyse
Insufficient mixing and degassing; casting temperature too low, viscosity high, bubbles difficult to discharge
Lösung
1) Vacuum degassing for 5-10min after mixing; 2) Increase casting temperature to 60-80°C to reduce viscosity and discharge bubbles; 3) Cast slowly to avoid air entrapment
Wichtigste Erkenntnis
PU casting bubbles are caused by insufficient degassing; vacuum degassing is key
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!