Material Drying
3 Aufrufe
Silver streaks caused by moisture during PVA processing
Problembeschreibung
PVA injection molded product surface shows white silver streak marks
Ursachenanalyse
Raw material moisture content >0.05% vaporizes during high-temperature processing forming bubbles that are stretched into silver streaks; insufficient drying or moisture condensation in the hopper
Lösung
1) Dry raw material at 80°C for 3-4h to moisture <0.02%; 2) Increase back pressure 0.5-1MPa for venting; 3) Reduce injection speed to avoid air entrainment; 4) Heat the hopper to prevent moisture condensation
Wichtigste Erkenntnis
Silver streaks are caused by moisture vaporization and stretching; drying and venting are the main countermeasures
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!