Injection Molding
2 Aufrufe
Thin flash appears at the parting line or moving parts of the product
Problembeschreibung
Thin flash appears at the parting line or moving parts of the product, affecting appearance and dimensional accuracy, mold mating marks visible at the flash
Ursachenanalyse
Injection pressure too high, exceeding the mold clamping force
Mold mating surfaces worn or machining accuracy insufficient
Barrel temperature too high (170-230°C on the high side), low melt viscosity, excessively strong flowability
Holding pressure too high, time too long
Clamping force insufficient
Lösung
Reduce injection pressure to a reasonable range
Repair mold mating surfaces to ensure accuracy
Appropriately lower barrel temperature to the low side of 170-230°C
Reduce holding pressure and time
Increase clamping force or change to a larger machine
Wichtigste Erkenntnis
Flash requires controlling injection pressure, temperature and clamping force
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!