Injection Molding
5 مشاهدة
Thin flash appears at the parting line or moving parts of the product
ظاهرة المشكلة
Thin flash appears at the parting line or moving parts of the product, affecting appearance and dimensional accuracy, mold mating marks visible at the flash
تحليل الأسباب
Injection pressure too high, exceeding the mold clamping force
Mold mating surfaces worn or machining accuracy insufficient
Barrel temperature too high (170-230°C on the high side), low melt viscosity, excessively strong flowability
Holding pressure too high, time too long
Clamping force insufficient
الحل
Reduce injection pressure to a reasonable range
Repair mold mating surfaces to ensure accuracy
Appropriately lower barrel temperature to the low side of 170-230°C
Reduce holding pressure and time
Increase clamping force or change to a larger machine
الخلاصة الأساسية
Flash requires controlling injection pressure, temperature and clamping force
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!