Molds & Tooling
3 Aufrufe
CEF flatness insufficient
Problembeschreibung
The flatness of the CEF flat plate product is >0.5mm/100mm, warpage
Ursachenanalyse
The CEF shrinkage rate is large and anisotropic; the mold cooling is uneven; the release of residual stress causes continuous warpage
Lösung
1) Uniform mold temperature to reduce temperature difference; 2) Increase the holding pressure to reduce shrinkage differences; 3) Annealing to release residual stress
Wichtigste Erkenntnis
Insufficient flatness is caused by shrinkage differences and stress; uniform cooling and annealing are the key
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!