Molds & Tooling
8 visualizaciones
CEF flatness insufficient
Fenómeno del problema
The flatness of the CEF flat plate product is >0.5mm/100mm, warpage
Análisis de la causa
The CEF shrinkage rate is large and anisotropic; the mold cooling is uneven; the release of residual stress causes continuous warpage
Solución
1) Uniform mold temperature to reduce temperature difference; 2) Increase the holding pressure to reduce shrinkage differences; 3) Annealing to release residual stress
Conclusión clave
Insufficient flatness is caused by shrinkage differences and stress; uniform cooling and annealing are the key
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!