Extrusion & Post
9 Aufrufe
DSTDP screw slipping
Problembeschreibung
During DSTDP extrusion, the screw slips, feed does not advance, output drops sharply
Ursachenanalyse
DSTDP granules melt too early in the feeding section forming a lubricating film causing screw slipping; feeding section temperature too high
Lösung
1) Lower feeding section temperature 10-15°C to delay melting; 2) deepen feeding section flight to increase material gripping force; 3) dry granule surface to reduce lubrication
Wichtigste Erkenntnis
Screw slipping is caused by premature melting; cooling the feeding section is key
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!