Extrusion & Post
13 visualizações
DSTDP screw slipping
Fenómeno do problema
During DSTDP extrusion, the screw slips, feed does not advance, output drops sharply
Análise das causas
DSTDP granules melt too early in the feeding section forming a lubricating film causing screw slipping; feeding section temperature too high
Solução
1) Lower feeding section temperature 10-15°C to delay melting; 2) deepen feeding section flight to increase material gripping force; 3) dry granule surface to reduce lubrication
Conclusão principal
Screw slipping is caused by premature melting; cooling the feeding section is key
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!