Extrusion & Post 9 Aufrufe

MP extrusion rough surface

Problembeschreibung

MP extruded product surface roughness Ra>5μm, exceeding the requirement

Ursachenanalyse

extrusion temperature low <150°C, melt flow unstable; die inner wall rough or damaged; MP melt elasticity, extrusion swell uneven

Lösung

1) raise extrusion temperature to 150-170°C; 2) polish die inner wall Ra<0.4μm; 3) reduce extrusion rate 10-15%; 4) add 0.3-0.5wt% external lubricant

Wichtigste Erkenntnis

rough surface is caused by low-temperature extrusion and die defects; raising temperature and polishing the die are the core countermeasures

MP extrusion rough surface die polishing extrusion temperature melt elasticity

War das hilfreich?

0 Personen fanden dies hilfreich