Injection Molding
5 Aufrufe
POE surface orange peel
Problembeschreibung
POE product surface orange-peel-like uneven texture, rough hand feel
Ursachenanalyse
Mold temperature too low <30°C, product surface rapidly cools and solidifies, then the interior continues to shrink causing surface unevenness; injection speed too low
Lösung
1) Raise mold temperature to 40-50°C to delay surface solidification; 2) Appropriately increase injection speed; 3) Increase holding pressure to reduce internal shrinkage
Wichtigste Erkenntnis
Orange peel is caused by rapid cooling and solidification; raising mold temperature and holding pressure are key
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!