Injection Molding
3 visualizaciones
POE surface orange peel
Fenómeno del problema
POE product surface orange-peel-like uneven texture, rough hand feel
Análisis de la causa
Mold temperature too low <30°C, product surface rapidly cools and solidifies, then the interior continues to shrink causing surface unevenness; injection speed too low
Solución
1) Raise mold temperature to 40-50°C to delay surface solidification; 2) Appropriately increase injection speed; 3) Increase holding pressure to reduce internal shrinkage
Conclusión clave
Orange peel is caused by rapid cooling and solidification; raising mold temperature and holding pressure are key
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!